After making dozens of end grain cutting boards over the past couple years I wanted to share a bit about which woods I consider the best (and most available) for constructing boards. We’ve said, time and again, that end grain is the premium construction method for cutting boards because of it’s antibacterial properties and kindness to our knife edges. A crucial basis for determining the wood we use is in it’s hardness. I’ve found the best online source for wood characteristics, including hardness is: http://www.wood-database.com/ When looking through the database, try to select wood in the hardness range of 850 - 1700; You also want to look for a hardwood with a relatively tight grain pattern, free of knots and other blemishes. The most common...
Have you ever wondered what to do with all those leftovers? I apologize up front to all the “foodies” out there but I’m actually referring to wood. Whether a seasoned carpenter or a woodworking hobbier we all end up with extra pieces from various projects which usually end up collecting in the “just in case” pile, or eventually find their way to the trash. I hate to waste things, especially interesting pieces of wood that I’ve taken the time to cut, plane, and glue after matching up contrasting colors and grain patterns. I’ve discovered that there is another option, and after talking to a fellow woodworker this weekend, I realized I’m not alone. By taking the various leftovers from my end...
Being a guy means I suffer with a common problem of male ego. We don’t always like to ask for help nor do we like to feel intimidated by what we don’t know. My first few trips to the lumber yard shopping for quality hardwoods were all about breaking that barrier. On my first trip I was asked by different employees if I needed some help, but I kindly replied “no thank you” and proceeded to walk around, observe the variety of woods, trying to not to look like I was new. After 30 minutes of “wandering” I finally swallowed my pride and went up to a guy and asked for help….and help I got! After that, it...
One of the common questions that came out of our first festival participation was “Where do you get your wood?” (usually posed by another woodworker or weekend hobbyist) This question sparked several conversations that led to an exchange of valuable information. It's human nature.............we enjoy sharing things we've discovered with others who share our interest. As far as wood sources go, for convenience there are the Big Box stores, but without offending anyone,they're primarily good for plywood and structure based wood (2 x 4’s, etc). Then there are lumber yards; however many of them are also focused on building materials. The places where you get prime hardwoods are specialty lumber businesses, generally to be found via online searches...
