After making dozens of end grain cutting boards over the past couple years I wanted to share a bit about which woods I consider the best (and most available) for constructing boards. We’ve said, time and again, that end grain is the premium construction method for cutting boards because of it’s antibacterial properties and kindness to our knife edges. A crucial basis for determining the wood we use is in it’s hardness. I’ve found the best online source for wood characteristics, including hardness is: http://www.wood-database.com/ When looking through the database, try to select wood in the hardness range of 850 - 1700; You also want to look for a hardwood with a relatively tight grain pattern, free of knots and other blemishes. The most common...
I recently finished a 'special" project.........while undertaking a new cutting board design inspired by another woodworker's online video, I finally got around to making a special cheese board for my wife. I've made numerous ones, some in the beautiful "tumbling squares" pattern as well as several others. She has helped with the design details, sourcing and choosing the complementary hardware for each, but every completed project found its way out the door as either a gift to someone special or to our retail marketplace. So as I took on this new design I decided it was time to rectify that situation. Here is a link to the "Slovenian Woodworker" who inspired my new board... https://www.youtube.com/watch?v=cniYoTxiEek&t=48s After considering his...
Have you ever wondered what to do with all those leftovers? I apologize up front to all the “foodies” out there but I’m actually referring to wood. Whether a seasoned carpenter or a woodworking hobbier we all end up with extra pieces from various projects which usually end up collecting in the “just in case” pile, or eventually find their way to the trash. I hate to waste things, especially interesting pieces of wood that I’ve taken the time to cut, plane, and glue after matching up contrasting colors and grain patterns. I’ve discovered that there is another option, and after talking to a fellow woodworker this weekend, I realized I’m not alone. By taking the various leftovers from my end...
Over the past several days I faced a familiar woodworker's crisis: one of my favorite tools, my lathe, quit working. I had purchased an inexpensive starter lathe awhile back and put out several nice products including pepper grinders, salt shakers and French rolling pins. Now it was time for an upgrade. Woodworkers love their tools and I’m no different. Many, like myself, also love the research involved before our next purchase; then there’s the weighing of price, practicality and performance. This is where my #1 fan comes in. My beautiful wife is not only my best friend but also my greatest encourager. She knows me; she listens to me, and she pays attention. As I was wrestling through my decision...
Being a small shop owner I realized one of the last things I considered when setting up my shop was how I was going to clear the air with all the sawdust and fumes I was creating. I do have the luxury of a covered deck outside my shop so much of my staining, sealing and sanding takes place outside, weather permitting. I also use a mask when working with chemicals, turning on my lathe, etc., but that still doesn't alleviate the inside problem where my most active power tools are: the table saw, miter saw and router to name a few. Like many others, my shop started small and slowly grew; and one of my first purchases...
