After doing plenty of research and trying multiple methods I came up with my own process of finishing hardwoods for products that do not come in direct contact with food. I’ve used this process on chess boards, lathe pieces (such as candle holders and pepper mills) along with coaster sets, etc. The finish is clear, hard and beautiful! Before I begin I’ll tell you what I tried previously: 1. Minwax Paste Finishing Wax: a nice starter product that applies easy and protects the wood, but hardly an “eye popping” finish 2. Boiled Linseed Oil covered with Instant Bond Wood Adhesive: better, but not great 3. A variety of other finishes I saw online but again, none matched the success below:...
One of the alternatives we offer to our “end grain” cutting boards is a slightly less expensive but equally durable “edge grain” board. As the term indicates, these boards use a different portion of the wood (edge) for your cutting surface. Although these boards do not possess the same qualities of end grain they do offer some distinct advantages. First you get a far different grain pattern from the edge of a piece of wood than you do from the end. (Below notice end grain top left, edge grain middle and lower left) Second, because less of the wood “fibers” are exposed, edge grain boards tend to hold their color longer than end grain. This can be particularly rewarding when...
I’ve been a lathe owner for a little less than a year so I am in no way qualifying myself as an expert. That said, I have created several salt and pepper mills and chess pieces that have received high compliments so I am an active lathe user. Like many of my “turning” friends I started by purchasing a rather inexpensive 12” lathe from Harbor Freight. If you have about $80 to spend (even less with a HF coupon) and want to see if turning is your thing, I highly recommend this route. I burned this lathe out after a few months trying to drill center holes in my ginders. So, after a few weeks of pondering and...
Following is a list ( not exhaustive) of the most common posed questions I've received from friends and customers. I've answered briefly, but am always happy to respond in more detail to those who contact me. How did you get started in woodworking? Following my dad’s footsteps I became a “fixer upper” by taking on several home projects like: built in cabinets, desks, shelving units, etc. 2. Did you have any formal training in woodworking? Nothing like woodworking classes, but instead I watched plenty of YouTube videos and read a lot of online blogs, tips and “how to’s.” What impresses you most about other woodworkers? Obviously their skill level and detail of workmanship; however most of all is their overall desire...
Once I began to hone my craft from hobbyist to woodworker, my friends began to take notice of the quality and creativity of my craftsmanship. With that came plenty of suggestions: "have you considered making.....?" Although flattered I have also become a realist who recognizes very quickly the limits of my skills or the time and effort that would be involved in trying certain things. As every woodworker advances we also become more aware of our own idiosyncrasies that we factor into any project. I am one who gets distracted easily so simply making the same thing over and over again, no matter how good I've become at it, becomes less interesting let alone challenging. Enter new challenges worth tackling. One of...
